CoatTech Intelligent Equipment(Guangzhou) CO.,LTD
CoatTech Intelligent Equipment(Guangzhou) CO.,LTD
Add to Cart
Controlled Air Distribution in Spray Booth with Square Tube Welding and Aluminum Frame
Each make-up air unit group in the spray booth is equipped with two external rotor double-inlet centrifugal fans,
with a single motor power of 7.5KW and a total airflow of 40000m³/h. The no-load wind speed is 0.25m/s.
The air supply features pneumatic adjustment dampers and cycle start pneumatic dampers, ensuring efficient
and controlled air distribution. These powerful units support a clean and efficient painting environment.
| Inside dimension | 15000 × 5000 × 5000 mm (L × W × H) |
| outer dimension | 15130 × 6890 × 5600 mm (L×W×H) |
| Basement | There are 2 rows of 30x4 flat iron + ⌀8 twisted steel floor grilles (24 pieces) on both sides of the ground (optional side wall exhaust) |
| front door | Door size: 4000 × 4600mm (W×H), sheet metal bending door, 4 door leaves, square tempered glass window, filling: EPS. (The filling can be adjusted, and the gate can be equipped withan electric rolling shutter) |
| working door | 2 sets, working door size: 800×2000mm (W×H), equipped with pressure lock and glass observation window |
| wall panel | EPS wall panel, effective width 1150mm, total thickness 70mm, color steel plate thickness: 0.426mm, white, steel edges sealed on both sides; ( Rock wool, PU optional ) |
| roof | EPS wall panel, effective width 1150mm, total thickness 50mm , color steel plate thickness: 0.426mm, white, steel edges sealed on both sides; ( Rock wool, PU optional ) |
| illumination | Top lighting: 20 groups × 4 pcs = 80 pcs 18W lamps Waist lighting: 22 groups × 4 pcs = 88 pcs 18W lamp tubes, LED lamp tubes, explosion-proof light box Illumination ≥1000Lux |
| Air Unit installation | Air inlet from the side , exhaust from the rear, square tube welding + aluminum tee frame, white paint, high-strength machine-made 20mm thick rock wool board mask |
| Make-Up Air unit (2 groups) | Each group is equipped with 2 external rotor double-inlet centrifugal fans, single motor power: 7.5KW; total flow: 40000m3 /h, no-load wind speed: 0.25m/s; air supply pneumatic adjustment damper , cycle start pneumatic damper . |
| Exhausted Air unit (2 groups) | Each group is equipped with 1 double-inlet centrifugal fan, pulley drive, single motor power: 11KW; total flow: 4000m3 /h, no-load wind speed: 0.25m/s; exhaust manual adjustment damper . |
| Heating System (2 sets) | Each group is equipped with a Riello RG5S Diesel burner with a maximum heat output of 26,000KW; equipped with a 304 stainless steel heat exchange furnace; temperature rise painting: 20°C (from 0°C to 20°C in the spraying state); baking paint: 10-15 minutes (from 20° to 60ºС) paint condition. (Natural gas heating, electric heating tube heating, and infrared baking lamp heating can be selected) |
| filtering system | 1Air supply primary filter cotton : EN 779 level: G3 2 sub-high efficiency filtration: full depth three-dimensional viscose; EN799 level: F5, 3 Glass fiber paint-resisting cotton blanket filtration: EN 779 Level: G3; 4. Activated carbon particle filtration: adsorbs benzene and xylene in exhaust gas |
| Electronic control system | Spray painting, heating spray painting, baking paint, drying time setting, lighting switch, fault indicator light, temperature controller, power switch, emergency stop switch, timer, temperature limiter , ammeter , voltmeter , pressure gauge, pressure alarm |
| Pipeline system
| Each group of air supply and exhaust is equipped with 4 sections of 10 00 x 10 00 x 1000mm straight air ducts, 1 section of 10 00 x 10 00mm 90° elbow, and 1 section of 10 00 x 10 00mm 45° elbow; |
| total power | 56KW |
The large-size automobile spray booth is designed to meet diverse needs with top-notch technical specifications
and adaptable features. The interior dimensions are 6900 × 3900 × 2650 mm (L × W × H),(COULD BE CUSTOMIZED)
while the exterior measures 7000 × 5350 × 3400 mm (L × W × H). (COULD BE CUSTOMIZED)The sturdy basement
features galvanized sheet bending hoarding, supported by square tubes and a floor grille, ensuring an overall load-bearing
capacity of 2.4T, adjustable as needed.
The main front door, 3000 × 2600mm (W×H), has three leaves with square tempered glass windows and EPS filling.
An additional working door, sized 800×2000mm (W×H), includes a pressure lock and observation window.
The booth’s EPS wall panels and galvanized sheet roof provide robust insulation, with optional materials available.
The lighting system delivers over 1000Lux with 32 top and 16 waist LED lamps. The air unit efficiently manages
intake and exhaust, aided by a Riello RG5S burner for optimal heating. The comprehensive filtration system ensures
a clean working environment, while the electronic control system offers precise operational control. Total power
requirement stands at 17kW.(COULD BE CUSTOMIZED)