High-Quality G3/EU3 Primary Filter Cotton In Paint Booth For Ventilation Systems

High-Quality G3/EU3 Primary Filter Cotton In Paint Booth For Ventilation Systems

Ensure optimal air quality in high-demand ventilation systems with our G3/EU3 primary filter cotton. Ideal for

air conditioning and air supply pre-filtration, it boasts humidity resistance, washable fabric, and non-flammability.

Made from polyester fiber, it efficiently filters particles ≥5μm, meeting EN779 certification standards.

13.1. Primary filter cotton, G3/EU3;

13.1.1 Purpose: used in the following equipment in high-demand ventilation systems

⭐In air conditioning and air ventilation systems;

⭐As pre-filtration in air supply systems under high dust exposure;

⭐Pre-filtration and flow equalization of the air supply in the spraying system and baking device;

13.1.2 Features:

⭐Humidity resistance reaches 100% r.F. Washable;

⭐Temperature resistance reaches 80 ℃ / 1 7 6 o F;

⭐Non-flammable, automatically extinguished in accordance with DIN53438 flame

retardant standards: F 1;

1.Material:

⭐ Made of polyester fiber carded and laid with gradually higher density and hot air,

the windward side is blue

⭐Filtering objects ≥5μm particles and foreign matter rolls or sheets;

Obtained EN779 certification;z

Glass fiber cotton, G3;

PA-50/70/100 paint mist filter cotton (G2.G3.G4/EU2.EU3.EU4)

13.3.1 Purpose:

The trapping of paint mist in spray booths and spray painting equipment systems or the adsorption of oil fumes from kitchen and chemical systems ultimately lead to exhaust emissions.

Release gas to meet environmental protection requirements.

13.3.2 Features:

⭐ Low compressibility, even under heavy paint loads; High absorbency, especially in paint spraying with high exposure, making it economical and practical;

⭐Temperature resistance reaches 170℃;

13.3.3 Material:

⭐Glass fiber with gradually increasing density, the windward side is green/yellow, the air outlet side is white, progressive structure, the density of the fiber increases towards clean air, the entire depth can be used in dust storage rolls or sheets

Obtained EN779 certification

2. Synthetic fiber bag filter, (G4 . F5 / EU4 . EU5 );

2.1 Purpose:

⭐Filtration of smaller particles in air filtration systems; pre-filtration of high-efficiency filters and air filtration of large painting lines.

13.4.2 Features:

⭐Large air volume

⭐Low resistance

⭐Sturdy structure

⭐High dust holding capacity

⭐High frequency hot melt edge sealing

3. Pleated dry filter paper;

3.1Purpose:

Filters solid or liquid particles in the air flow and acts as a flow equalizer.

13.5.2 Features:

⭐The shape design is conducive to frontal speed distribution;

⭐Weak resistance to air, maximum filtration effect;

⭐Exceeds the service life of other types of filter paper, up to six times;

⭐Continuous use for 500-600 hours, in line with DIN53438 flame retardant standard: k1;

⭐The air outlet surface is lined with glass fiber cotton or synthetic fiber cotton for better results;

⭐Framed filters can be made upon request;

3.2Principle:

Overspray collection and separation filter paper are all based on the principle of inertial separation. The load airflow is forced to change direction multiple times so that those heavier-than-air particles stick to the wall, while the air continues to move without any particular hindrance. When air passes freely through the holes, the particles are adsorbed on the pleats until the filter is saturated.

FAQ
1,Who are we?
CoatTech Intelligent Equipment(Guangzhou) CO.,LTD is a professional enterprise that produces environmental
protection equipment.

2,How do we ensure quality?
Always conduct final inspection before shipment.

3,What can you buy from us?
The main product is spray booth,coating line,painting line.

4,Why do you want to purchase from us instead of other suppliers?
We have been specializing in the production of environmental protection equipment for many years, and are a manufacturer
of environmental protection equipment that integrates design, research and development, production, and after-sales service.

5,What services can we provide?
Accepted delivery methods: FOB, CFR, CIF, EXW, CIP; Accepted payment currencies: USD, EUR, AUD, RMB;
Accepted payment methods: wire transfer, letter of credit, cash.

6,What is your delivery date?
Normally, we will send you our standard specification goods within 10-15 days after receiving your payment.
This depends on the quantity you order.

7,Can you design the artwork(design) according to our requirements?
Of course we can. All products can be customized according to your own design.

8,Are you a factory or a trading company?
We are a factory with our own design and production, and competitive price advantages.

9,Where is your factory located?
Guangzhou City,Guangdong Province, China.

10. How do I get there?
About half an hour's drive from Guangzhou International Airport. Welcome friends from all over the world to our factory.